Dawner Prince er høykvalitetseffekter, laget av en liten gjeng med herre i Kroatia. De ble seriøst lagt merke til når de lanserte Boonarmodellen, som er en til fingerspissene sonisk reproduksjon av den klassiske Binson Echorec ekkomaskina. Vi har testet hele sortimentet, og det er jevnt over like imponerede over hele linja.
Boonar - Multi Head Drum Echo
Når Dawner Prince bestemte seg for å blåse liv i den gamle Binson Echorecmaskina, så var det godt innforstått om at det ikke var en enkel oppgave og at terskelen for suksess var høy.
Vi i Toggata 28 kan ihvertfall stemme i og bekrefte at dette er ekstremt likbart, og den definitivt den mest anvendelige varianten på markedet.
Konseptet er en simulering av Echorec, som i motsetning til periodens tilsvarende ekkomaskiner som brukte tape, så brukte denne fire motoriserte magnetiske disker, populært kalt en tromme, til å produsere ekkoeffekten.
Binson Echorec hadde ikke mindre enn seks rør i preampen, så det er ikke -bare- ekkoeffekten som skal gjenskapes, men også den eminente preampeffekten denne maskinen hadde, og som ble blant annet signaturlyden til David Gilmour i Pink Floyd. Kort fortalt, så har de klart det, og de har også klart å få mer ut av designet, da den originale Echorec stilte med 12 presets, så har Boonar inkludert de tolv originale fått fire presets til.
Signalgangen i preampen på Boonar er helt lik den originale enheten, men i stedet for å bruke rør, så bruker de høyspentdrevne FETs som rørsimulatorer og DSP-teknologi for å simulere de magnetiske trommene.
"The Boonar is very much like an Echorec for the 21st century with FET inputs to simulate tube dirt on the repeats and a digital DSP unit controlling the virtual magnetic drum. It is dark, cavernous and unpredictable with huge range of tones available from slapback all the way to self-oscillating madness." Read more...
"The Boonar will be hard to beat and with the small footprint in mind, the full set of controls and more than convincing tone, you don’t need to look any further for the full Live at Pompeii and Dark Side of the Moon experience." Read more...
controls the output volume of the delayed signal coming from the playback heads. This control is based on Input control setting.
adjusts the EQ of the delay signal. Just like in original Echorec machine, this effect is subtle, changing from darker to brighter.
SWELL (LENGTH OF SWELL)
sets the amount of regeneration/number of repeats from single repeat (slap back delay-Echo mode) of each playback head to infinite. On the edge of self - oscillation Boonar will start to produce those specific luscious swells that bubble, creating a complex multi-dimensional wall of sound.
sets the rotational speed of the virtual magnetic drum which is directly proportional to the delay time of the machine. Unlike Binson Echorec with fixed drum speed and delay time of 300ms max on the 4th playback head, Boonar provides delay times from ~40 ms on the 1st playback head up to a full second (1000 ms) on the 4th playback head! Fully clockwise setting corresponds to the fastest drum speed hence shortest delay times. Binson Echorec delay time setting is at 3 o'clock.
this control adds all those sweet aging characteristics specific to Binson Echorec. When new Echorec repeats are bright, metallic sounding and repeat pretty accurately since magnetic drum was quite an improvement over magnetic tape. But with aging there is a slight loss in volume and high frequencies due to a wear/poor playback heads alignment and a very unique modulation is introduced in the delay signal. This modulation is mostly caused by worn mechanical parts that start to irregularly drive the memory disc/drum and unlike other delay modulations this one is more of a vibrato than a chorus effect.
With Drum Age control set to zero (fully clockwise), there is a minimum aging effects present in the delay signal. Increasing it to 12 o'clock will add a subtle amount of modulation producing a pleasant wow effect, while on maximum will introduce a nice warble with noticeable loss in high frequency and volume on the playback heads. Another important characteristics is that Drum Age modulation frequency (the rate of the warble effect) is directly proportional to the Drum Speed - as the drum speed is increased, so is the rate of the warble and vice versa.
A lot of time and hard work went into recreating all those characteristics, meaning carefully measuring all the parameters on the actual machines and transferring them into the Boonar's DSP - virtual magnetic drum.
controls the level of the input signal to the delay path. This control enables Boonar to accept all kinds of instruments with various signal levels on the input. Cranking the Input Control all the way up will produce those beautiful overdrive effects on the delay, specific to the Binson Echorec.
Binson Echorec had a 12-position rotational switch that was used to select different playback heads and combinations for single and multi-tap delay. We wanted to overcome that limitation and added a separate playback heads switches for a maximum of 16 possible head combinations. All four playback heads outputs are true analog.
The Level Indicator called a "magic-eye" displays the level of input signal and repeats.
switches between standard Repeats mode - a multiple repetitions depending on the Swell control potentiometer and a Swell mode which puts a portion of signal from all four playback heads into the output mixer to produce those reverb - like, "cathedral tone" effects.
Boonar utilizes both True bypass and Trails mode simply interchangeable by setting internal DIP switches according to the provided scheme. Trails mode keeps Boonar's preamp and output buffer engaged keeping that juicy Binson Echorec tube tone always on, and when bypassed echoes keep repeating until they naturally decay, depending on the Swell potentiometer setting. Trails mode is factory preset.
DRY VOLUME (KILL DRY)
internal trim pot sets the level of the dry signal coming from the preamp into the output mixer. It is factory set to unity gain.
internal DIP switch sets the input impedance from very low - 47K Ohm in Original mode (Binson Echorec mode) to 1M in Modern mode which brings more sparkle, dynamics and a bit more output volume.
Modern mode is factory preset.
Power Input Voltage: 9V DC
Power input connector: 5.5mm / 2.1mm barrel connector (Center Negative)
Power Consumption: ~ 180mA
Size: 4.4” x 2.3”